Bed & Bath Linen Quality Control

On this page, we’d like to share with you our internal custom bed & bath linen quality standards.
All customized bed and bath linens from us all produce as per below steps. 3rd party inspection is also acceptable.

Incoming material checking: Make sure the bulk quantities of fabrics’ colors & density & quality are the same as the pre-production samples you approved. Make the colorfastness testing, ensure no drawnwork no bad smell.

Custom bed & bath linen Production Period

Stage 1: the related QCs will arrange full & sampling inspections during this stage, like check the quality of fabric, embroidery, printing quality pc by pc. Confirm the label information/Carton mark with the sales team.

Stage 2: Start fabric cutting, sewing, hemming and ironing for bed linens, other towel linens are also ironed if needed. Then get samples from mass production to do safety testing by 3rd party, do metal detection, final packing.

Stage 3: Packaging all finished. Our team will arrange the final AQL 2.5 standard inspection. If the internal inspection was passed, the QC leader will submit the report to the sales team. If failed, the whole order of plushes toys will need to rework and accept re-inspections.

Internal quality control standard: The production quality should be arranged strictly according to the sample client approved. stitching is firmed enough to pass the tensile test, no sharp edge, clean, no bad smell, metal detection is compulsory before pack into the opp bags, all bags with air holes and warning words. 10 times carton drop testings passed.